Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Never immerse the device, cable and power plug in water or any kind of fluid.
• Do not pick up the device if it has fallen into water or any kind of fluid. Remove the plug from the power socket
immediately. Do not sue the device again.
• Place the device on a flat and stable surface, in a place where it cannot fall over.
• Caution! Dispelled water is hot. Do not touch it to avoid burning yourself.
• The device is equipped with an overheating safety feature. This is activated if the temperature becomes too high.
If this is the case, you must let the device cool down before it can be used again. Switch OFF the device and then
remove the plug from the power socket. Allow the device to fully cool down. The device needs approximately 30
minutes to fully cool down.
• Remove the power plug from the power socket if the device is unused for long periods of time.
• When removing the plug from the power socket, pull the plug itself, not the cable.
• Do not operate the device using an external time switch or a separate remote-control system.
3) INSTALLING AND USING THE DEVICE
Open the packaging carefully before taking out the device. Make sure the device is complete and undamaged.
If any components are missing or damaged, contact the vendor and do not use the product. Retain the packaging or
recycle it in accordance with local regulations.
Parts & features device
Control panel details
5
Werbung
