Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4) CLEANING AND MAINTENANCE
Descaling
To maintain its performance, it is recommended to descale the device on a monthly basis in case of regular use.
On use a toxic free detergent such as citric acid or vinegar!
Pour some citric acid or vinegar into the water tank. Dispense the liquid until the tank is empty.
Repeat this a couple of times, to get rid of the scale completely.
After completion, the water tank and device need to be cleaned.
Pour out all boiled water and add pure water. Dispense the water until the tank is empty.
Repeat this two or few more times, each time with new fresh water, before you consume the dispensed water.
Cleaning and maintenance
• Remove the plug from the power socket and allow the device to fully cool down.
• Never immerse the device in water or any other liquid.
• Clean the device after each use.
• Clean the casing and insides with a damp cloth.
• Do not use any washing up liquids in the water tank!
• Never use aggressive or abrasive cleaning materials, a scouring sponge or a steel wool; these damages the device.
• Dry the device thoroughly.
• Store the device in a dry place.
Error Code
Display shows "E7"
Display shows "E2", "E5"
Display shows "E1", "E4"
No display or no heating
function
5) SPECIFICATIONS
• Voltage input: 220-240 V~, 50/60 Hz
• Power: 2200-2600 W
• Temperature setting: ambient water temperature, 45°C, 55°C, 65°C, 75°C, 85°C, 100 °C
• Volume setting: 100ml, 200ml, 300ml, 400ml, continuous flow
• Tank capacity: 2.7 L
• Dimensions: 30.5 x 15.0 x 25.5 (H x W x D)
• Weight: 2.20 kg.
Lack of water
Temperature sensor problem at water
inlet
Temperature sensor problem at water
outlet
Thermostat cut-off
Fill water in water tank to MAX level
Consult local supplier for checking.
Consult local supplier for checking.
Use reset key to press the reset hole and
reset the device
10
Werbung
