Herunterladen Diese Seite drucken

cecotec IRONHERO 2600 FORCE Bedienungsanleitung Seite 38

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 49
ENGLISH
6. Move the steam adjustment lever to the setting most suitable for the different types of
fabric to be ironed.
You can now proceed to steam ironing.
-
Using the steam shot
The steam shot function provides additional steam to remove stubborn creases. It can be
-
used with both dry and steam ironing.
Press the steam-shot button to release a steam shot. It may be necessary to press the
-
button several times to activate the surge system. Wait a few seconds for steam to
penetrate the fabric before pressing the button again for more steam.
Note:
For optimal steam quality, do not apply more than three consecutive steam shots after the
indicator light turns off.
Anti-scale function
The anti-scale function is a permanent system inside the water tank used to remove impurities
from the water and reduce problems caused by limescale build-up.
To extend the efficiency of the system, occasionally follow these steps:
1. Unplug the iron and allow it to cool down.
2. Use the container to fill the tank. Fill it up to 3/4 full with water. Add 1 teaspoon of salt and
fill the water tank with this mix.
3. Leave the solution in the water tank for 15 minutes, shake the iron from time to time, and
then empty it.
4. Fill the water tank a second time with saline solution, stirring occasionally, and empty it
again after 15 minutes.
5. Fill the tank with water for rinsing and then empty it.
Anti-drip function
This system controls the water flow emitted to the soleplate at all times. Above a certain
temperature, the anti-drip function cuts off the water flow and prevents the soleplate from
dripping water onto the garments.
4. CLEANING AND MAINTENANCE
After each use
1. Turn off and unplug the iron.
2. Empty the tank immediately after use. Do not store the iron with water in it.
3. Wait until the iron has cooled down before storing it, and always place it on the base to
protect the soleplate from scratches, corrosion, or stains.
4. After allowing the iron to cool down completely, store it upright in a safe place.
38
IRONHERO 2600 FORCE

Werbung

loading