Wilfa DUALFRY AFD-60B Anleitung Seite 10

INSTRUCTION MANUAL · DUALFRY
BEFORE FIRST USE
EN
1. Remove all packaging materials, stickers, and labels.
2. Clean the gridiron and pan with hot water, soap, and a non-abrasive sponge.
3. Wipe the inside and outside with a clean cloth.
4. Place the appliance on a flat and even surface.
NOTE: There is no need to fill the pan with oil or fat because the appliance
works on hot air.
HOW TO USE
1. Plug in the unit, long press ON/OFF button to start.
2. To select a pre-set program, just press menu , until the corresponding icon
blinks, and short press start/pause to start the program.
3. Short press the start/pause button to start or stop cooking.
4. Long press ON/OFF button to turn the unit off.
5. Unplug the unit after use.
PREHEAT FUNCTION
To preheat the airfryer, press the preheat button, and it will heat up for 3
minutes.
WORKING MODE
After selecting a preset or preferred time and degree, press start button to get
started. When the cooking operation is finished, the airfryer alert you with 2 long
beeps. The display shows "end", and the unit will go into sleep mode if you
don't take any more actions.
SHAKE REMINDER
The shake reminder will alert you with 2 short beeps, and the display shows
"trn". Pull the pan out, shake it and put it back into the unit. The alarm stops
when you pull the pan out.
The shake reminder is programmed to alert halfway through the cooking when
set on manual, and 2/3 of the total cooking time of the presets.
When the cooking time is less than 3 minutes, the alert will not go off.
LOWER HEATING FUNCTION
When this button is blinking, both the upper and lower heating elements
are on. To turn off the lower heating element, press the button, it stops blinking,
then press start/pause button to start the airfryer with just the upper heating
element.
8