Cloer 6720 Bedienungsanleitung Seite 9

Assemble the stand
Turn the stand platform up-side-down to assemble
the stand as shown below. Turn over the stand and
hang the basket onto the side bars of the legs.When
using the grill with the stand, ensure that the feet of
the grill sit fully into the recess of the stand platform
and ensure that the grill stands even.
Assemble the grill 6720 /6725
Place the drip tray into the base. Position the cooking
plate over the base and drip tray. Never use the grill
without the drip tray! Slide the glass lid into the hin-
ges of the base, from back to front.
Operating instructions
• The lid handle will lock into the base when it is closed.
• To open the glass lid, simply squeese the lid handles
release lock that are located underneath the lid handle.
• The grill can be used in closed or opened lid position.
• At opened position, the glass lid also act as a wind
shield for outdoor cooking.
• Your grill has an integrated heating integrated in the
die-cast plate of the grilling surface.
• It provides for a constant and good heat distribution
and healthy preparation of your grilling goods.
• Due to the inside heating there is no offensive smell
and smoke because of dripping down and burning fat.
• Your Barbecue Grill is provided with a non-stick coa-
ting, avoiding sticking of grilling goods and facilita-
ting cleaning.
• The infinitely variable thermostat at the connector plug
serves for adapting the grilling temperature to the re-
spective grilling goods or for keeping meals warm.
• Fat and juices developing during cooking are collec-
ted in the removable fat collecting pan.
Start-up
• Put the Barbecue Grill on a dry, non-slip and even sur-
face or on the stand provided.
• Insert the temperature control probe fully into the
socket of cooking plate and plug into a wall outlet.
• Set the temperatur control to the desired cooking
temperature.
• The grill is ready to use when the thermostat lamp
switches OFF.
• Now place the desired grillables to the grill.
• Please note: The thermostat lamp on the temperatu-
re control probe indicates the grill is heating up. The
lamp will remain ON until the set temperature has
reached, and then cycle ON and OFF throughout co-
oking to maintain the temperature.
• Do not use the grilling goods by means of tongs or
forks of metal as this will damage the non-stick coa-
ting.
• Please exclusively use grill cutlery of wood or heat-
resistant plastics!
• Do not use aluminium grill pan at the grilling surface
as this will cause a dangerous development of heat.
Cleaning
• To clean the appliance, you should exclusively use
soft, humid clothes. Do not clean the appliance and
all of its parts by hard pot sponges.
• Before cleaning please always unplug power plug.
Always let appliance completely cool down before
cleaning.
• The removable connector plug must not get in con-
tact with water. Just clean the plug by means of a
humid cloth.
EN
9