Cloer 6720 Bedienungsanleitung Seite 8

Technische Daten
type volt
672 230
Before the first use
Read these operating instructions
carefully before using the appliance
for the first time.
• Remove all packing parts and possibly stickers, but
not the type plate nor the serial number.
• Place the Barbecue-Grill on a dry, slip-resistant and
EN
level surface.
CE Label / Safety information
The appliance meets the requirements
of the applicable CE directives.
ATTENTION! Grilling surface gets
extremely hot in operation. There is
the danger of burns and fire! Only
touch the grill or the grill plate at the
heat-isolated handles.
• Never cover the grilling surface with aluminium foil.
Do not put saucepans, pans or aluminium bowls on
it, as the heat development can cause deterioration
of the non-stick coating.
• Never put baking paper and inflammable materials on
the grilling surface. The immense heat can cause fire.
• Never let the Barbecue Grill unattended while in ope-
ration.
• You can clean the grill plate under running water; ho-
wever, thereby it is absolutely necessary to pay atten-
tion to the following:
- The detachable device plug must be taken off. It
must not have any contact with water.
- The plug socket on der grill plate must be complete-
ly dry before putting the grill again in operation.
You can find other cleaning instructions on the fol-
lowing pages.
ATTENTION! Even at the lowest
setting of the thermostat (level 1 or
lower) the appliance is already in
operation. Unplug the power plug to
switch off the appliance completely.
8
hz watt
50 2200
Set up
Parts of the Barbecue Grill 6720 / 6725:
1. Lid handle
2. Glass lid
3. Cooking plate
4. Handle
5. Temperature control socket
6. Temperature control probe
7. Thermostat lamp
8. Drip tray
9. Base
10. Hinges
Parts of the stand 6725:
1. Stand platform
2. Legs
3. Cross bar
4. Cross bar clip
5. Basket