Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not nec-
essarily mean there is a defect in the appliance. For this reason, please
check the table to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
■ Never attempt to repair the appliance yourself. You can put
your own and future users' lives in danger. Only authorised
specialists are allowed to carry out this repair work.
Problem
Possible cause
The cutting
You are trying to
blades are
blend too much
jammed.
food.
The food is sticking
to the cutting
blades.
Heat, smoke
You are trying to
and an unusual
blend too much
smell occur
food.
You are using
while blending.
the appliance for
longer than the
allowed working
time of 1 minute.
The food you are
blending is too hot.
Troubleshooting table
Solutions, tips
Reduce the amount of food.
Pull the mains plug out of the
socket and then free the cutting
blades from the food.
Reduce the amount of food.
Shorten the working time to a
maximum of 1 minute and then
let the appliance cool down for
at least 2 minutes.
Make sure that the food is not
hotter than 60 °C.
Page EN-21
Werbung
