Conel CLEAR PRO FILL Bedienungsanleitung Seite 7

2.
EXCHANGE OF THE RESIN
Fold up the funnel provided.
Screw the centering disk through the funnel to
the cartridge so that the funnel and cartridge are
connected.
Place the funnel on the opening of the cartridge
and center the lance [D] in the cartridge with the
thorn [E] of the centering disk [F].
At the same time, the opening of the lance is
also closed by the centering disk so that no resin
can enter from above during filling.
Now fill the corresponding resin through the
funnel into the cartridge.
7
[F]
[E]
[D]