Conel CLEAR PRO FILL Bedienungsanleitung Seite 6

6
1.
PREPARATION
To change or refi ll the cartridge, press the
menu with the
You can now unscrew the cartridge.
Before refi lling, you must empty the cartridge. To do this, close it with the complete green lid and then
unscrew the inner cover [A]. Turn the cartridge 180° [B] and then place it on the knobs of the lid [C].
Aft er the water has drained
out, turn the cartridge 180°
again. Now remove the com-
plete green cap. Shake out the
resin and rinse the cartridge
thoroughly with water.
or -butt on.
Press the -butt on to start
changing the cartridge.
1. Use the
or
butt on to select whether
you want to change the
cartridge now.
3. Use the
or
butt on to select the size of
the cartridge (2.5, 4 or 7
litres).
-butt on and select „Change cartridge" from the
The heati ng fi lling must not be
acti ve during the cartridge change.
-
-
[A]
2. Use the
butt on to determine the
cartridge type (HWE, HVE
or HVE+).
4. Change the cartridge.
[B]
or -
[C]