Akrapovic Slip-On Benutzerhandbuch Seite 12

www.akrapovic.com
5. Assemble the carbon-fiber shield onto the exhaust valve, using Akrapovič M5 bolts and heat resistant washers
(Figure 13).
IMPORTANT: heat resistant washers should be between carbon-fiber shield and shield brackets!
6. Align the muffler in respect to the motorcycle. Tighten the muffler bracket (using stock bolt with washer) and metal
muffler inlet clamp (Figure 14).
4.9Nm
3.6ftlb
22 Nm
16 ftlb
Figure 13
9.8Nm
7ftlb
Figure 14
12 / 18