Akrapovic Slip-On Benutzerhandbuch Seite 10

www.akrapovic.com
INSTALLATION OF THE AKRAPOVIČ SLIP-ON STREET LEGAL EXHAUST SYSTEM:
1. Correctly install the clamp onto the muffler inlet bush as shown (Figure 9).
IMPORTANT: use anti-seize copper paste on bolt threads of the clamp!
Slide the muffler onto the stock outlet and correctly attach the cables onto the cable bracket (the cable with black
2.
adjuster must be on top!). Adjust the lower adjuster as shown - 4.5mm between adjuster nuts (Figure 10).
IMPORTANT: be precise at adjusting the cables, or the exhaust valve won't work properly!
Figure 9
Figure 10
10 / 18