AEG BPE556360M Benutzerinformation Seite 153

Step 1 Remove all accessories and removable shelf supports from the oven.
Step 2
Set the maximum temperature for the function:
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function:
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is ventilated.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 How to set: Heating functions
Step 1 Turn the knob for the heating functions and select a heating function.
Step 2 Turn the control knob to set the temperature.
Make sure that the oven is cold.
Step 1
Fill the cavity embossment with tap water.
The maximum capacity of the cavity embossment is 250 ml. Do not refill the cavity embossment during cook‐
Step 1
Turn the knob for the heating func‐
tions to the off position to turn off
the oven.
Steam cooking
Step 2
Select the steam
heating function.
ing or when the oven is hot.
When the steam cooking ends:
Step 2
Carefully open the door. Released hu‐
midity can cause burns.
.
.
Step 3
Set the tempera‐
ture.
Make sure that the oven is cold.
Remove the remaining water from
the cavity embossment.
Step 4
Preheat the empty oven
for 10 min to create hu‐
midity.
Put food in the oven.
Step 3
ENGLISH 153