Saro ECO Betriebsanleitung Seite 19

Seite 19 von 22
MAINTENANCE
The coffee machine requires minimal maintenance. Follow the points under Installation and Cleaning.
STORAGE / TRANSPORTATION
Turn off the device, unplug it. Thoroughly clean the device inside and outside. If it is dry and will not be used for an extended
period, store it in a dry, dust-free, and non-hot place. Empty the boiler by turning the device upside down. Ideally, cover the
device or use the original packaging to protect it from damage. Secure the device to prevent pets from climbing in and getting
trapped. When storing only the packaging material, be aware that components of the packaging such as plastic bags,
cardboard, styrofoam parts, etc., can pose a danger to children if they can play with them unsupervised (e.g., choking hazard).
For transporting the device, it is best to use the original packaging to provide optimal protection against shocks, sharp edges,
weather conditions, etc. Avoid exposing it to moisture or rain and prevent strong vibrations.
TROUBLESHOOTING
In case the brewing cycle does not work, turn off the device and unplug it. Completely remove any remaining water in the machine
if present. Remove the rear cover and check if you can press the button on the side of the boiler. If the button is pressed and
clicks, the coffee machine is performing a reset. Descale the device before using it again.
CIRCUIT DIAGRAM
Stand 02/24 SvN