Saro ECO Betriebsanleitung Seite 17

Seite 17 von 22
INSTALLATION
Place the device in a dry and well-ventilated room. Ensure a secure placement on a dry and non-slip surface.
Position the device with the back at least 10 cm away from the wall to ensure adequate air circulation at all times. Above the
device, there should be a minimum of 30 cm of space, and on each side, there should be 10 cm of clearance.
Ensure that the power plug is always easily accessible and can be disconnected from the power grid without any difficulty.
CONNECTION
Before connecting the device, ensure that the voltage and frequency of the power supply match the information on the
nameplate! Different voltages can lead to overheating of the device!
Connect the device only to a grounded socket with protective grounding and a 230-volt outlet.
After a power outage or if the device has been disconnected from the power grid, wait at least 5 minutes before reconnecting
and operating the device!
STRUCTURE AND PARTS
Stand 02/24 SvN