Panasonic WV-BL90 Bedienungsanleitung Seite 8

6 Lens Selection Switch (AUTO IRIS, DC/VIDEO) 8 Flange-back Adjusting Ring
This switch is used to select the supplied auto iris Used to adjust the backfocus or picture focus by
control signal to the lens from the Auto Iris Lens rotating this ring.
Connector (7).
DC: Choose this position when the auto iris 9 Video Output Terminal
control lens requiring DC control signal Use a coaxial cable with BNC connector. The cable is
such as WV-LA4.5, WV-LA18, WV-LA36, connected to the CAMERA INPUT connector on the
WV-LA6B2, WV-LA12B2 etc., is mounted video monitor WV-BM90 or Camera Drive Unit
on the camera. WV-PS10A, WV-PS104 and receives the DC power
VIDEO: Choose this position when the auto iris and vertical drive pulses for the camera from the
control lens requiring video signal such as video monitor WV-BM90 or Camera Drive Unit
WV-LA8B, WV-LA16B, WV-LA25B, WV- WV-PS10A, WV-PS104, and also sends the video
LA50B etc., is mounted on the camera informations to the video monitor or Camera Drive
together with optional Lens Mount Con- Unit.
verter (C-mount adaptor) WV-AD20,
7 Lens Connector (4 pin)
Use to connect the lens for the automatic iris control.