Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Camera Mounting Screw Hole
These
holes are one
each
on
the top and
bottom
covers
and are used
to mount
the camera
onto
a
mounting bracket or tripod, and is threaded (1/4" -
20).
Power Indicator
This
lamp indicates that the camera
is in operating
condition.
Lens (Option)
CAUTION
: Use an optional
Lens Mount Converter
(C-mount
adaptor)
WV-AD20
to pre-
vent damage of the inner glass and have
proper
flange-back
length
when
an
op-
tional C-mount lens is used,
AGC ON/OFF Switch (AGC, ON/OFF)
This switch
is used
to select the gain of the video
amplifier as follows;
ON:
When the lens iris is fully opened at low light
shooting,
a
clear
picture
is obtained
by
automatic increase of the gain.
OFF:
A natural and low-noise picture is obtained at
low light shooting.
Auto Iris Level Control (AUTO
IRIS LEVEL,
L(Low)/H (High)
This control adjusts the control level of the auto iris
control when the Lens Selection Switch
(6) is set to
the DC position and the auto iris lens which requires
the DC control
voltage such as WV-LA12B2
etc., is
mounted on the camera.
Note :
When
the Lens Selection Switch
(6) is set
to VIDEO
position,
the auto iris control
level
should
be
adjusted
by
the
lens.
Adjust this control
while setting the AGC
ON/OFF
Switch
(4) to OFF
position.
Werbung
