Transport And Storage; Installation - Stahl 8060/1 Betriebsanleitung

Transport and Storage

Changing the roller lever position
Mounting the position switch using two screws, min. M 4 x 25;
tightening torque = 1.2 Nm
When explosion-protected electrical equipment is exposed to the weather, it
is advisable to provide a protective cover or wall.
8 Transport and Storage
Transport and storage are only permitted in the original packing.
9

Installation

Mains Connection
The conductors must be carefully connected.
The conductor insulation must reach to the terminal. The conductor itself must not be
damaged (nicked) when removing the insulation.
Ensure that the maximum permissible conductor temperatures are not exceeded by
suitable selection of cables and means of running them.
Please also refer to the terminal details in the technical data.
12
Position Switch
8060/1
11436E00
11439E00
131382 / 8060603300
S-BA-8060/1-02-en-04/11/2008