Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mulching kit AMK 039
With a mulching kit, a conventional lawn
mower can be converted into a multi-
mower. For this purpose, the mowing
blade must be replaced with the multi-
blade.
A multi-mower can be used as a grass
collector (with grass catcher box), a rear
discharge mower (with discharge flap
closed), or as a mulching mower (with a
mulch insert).
1. For your safety
Observe the instruction manual for the
lawn mower, particularly the "For your
safety" and "Maintenance" sections. The
instructions for blade maintenance must
always be observed.
Disconnect the safety plug (RMA) or
mains plug (RME) before performing any
work on the lawn mower.
Before each use, perform a visual check to
ensure that the mulch insert, multi-blade
and blade fastening are in good condition.
Only use the mulch insert in conjunction
with the multi-blade.
Risk of death from suffocation!
Packaging material is not a toy -
danger of suffocation! Keep
packaging material away from
children.
0478 909 9926 B - EN
All manuals and user guides at all-guides.com
2. Standard equipment
Item
Designation
A
Multi-blade
B
Mulch insert
C
Blade fastening screw
–
Instruction manual
3. Assembly
3.1 Installing the multi-blade
● Tilt the lawn mower upwards into
the cleaning position and remove
the mowing blade (see the instruction
manual for the lawn mower).
● Discard the blade fastening screw.
● Clean the blade contact surface and
blade bushing.
● Fit the multi-blade (A) with the curved
wings pointing upwards (towards the
mower) onto the blade bushing.
● Use a suitable wooden block to
counterhold the multi-blade (A).
● Apply Loctite 243 to the blade
fastening screw (B).
● Screw in the blade fastening screw (B)
and tighten.
Tightening torque:
10 - 15 Nm
Printed on chlorine-free bleached paper. Paper is recyclable. Cover is halogen free.
3.2 Mulch insert
Inserting the mulch insert:
● Open the discharge flap and hold
it open.
1
Qty.
● 1 Insert mulch insert (C) into the
discharge chute.
1
1
● 2 Allow it to engage in the housing by
applying pressure from above (see
1
illustration).
1
● Close the discharge flap. The lawn
mower is ready for mulching.
Removing the mulch insert:
● Open the discharge flap and hold it
open.
● Pull the mulch insert diagonally
2
upwards out of the discharge chute.
● For use as a rear discharge mower,
close the discharge flap, for grass
collecting, attach the grass catcher box.
4. Mulching instructions
4.1 General information
During mulching, the cut grass is chopped
up several times through a special air flow
guidance system in the mower blade area
and then blown back into the turf. The
clippings remain on the lawn.
The decomposing clippings return organic
nutrients to the soil, serving as a natural
fertiliser.
Emptying the grass catcher box and
disposal of the clippings are dispensed
with. Weed growth is slowed down and
significant amounts of fertilizer are saved.
3
5
Werbung
