Polar UA044 Benutzerhandbuch Seite 9

Removing the lid
1. Remove the lock and lift the front lid.
2. Push forward a little to get the whole lid out.
Warning:
• NEVER attempt to clean/sanitizer the lid
while it is installed in the appliance.
• As the lid is equipped with LED lights,
NEVER soak it in any type of liquid for
cleaning.
• During cleaning, Never let water or
any liquid come into contact with the
electrical parts of the light.
1. Use a clean damp cloth to wipe the bottom
part of the lid.
2. Wipe clean the whole outer part.
3. Sanitize the bottom part with a sponge
previously damped with sanitizer solution.
4. Allow to act for 30 minutes.
5. Wipe the bottom part twice or more with a
clean sponge soaked with clean water.
6. Let the lid dry well.
Removing the handle seat
1. Remove the screw on the top.
UA044_UA045_UA046_ML_A5_v1_20240112.indb 9 UA044_UA045_UA046_ML_A5_v1_20240112.indb 9
2. Hold the handle and outlet, then lift upward.
3. Remove the stopper and clean with warm
water.
4. Clean the handle seat and other spare parts
with warm water.
EN
9
2024/1/12 10:10 2024/1/12 10:10