Polar UA044 Benutzerhandbuch Seite 5

Installing the handle
1. Fix the 'A' position of the handle
to the 'B' position of the bowl.
2. Lift the handle up then pull it
down, ensuring it is clicked onto
the 'C' positions of the bowl.
3. Tighten the screw on the 'E'
position.
Warning:
Ensure to correctly install the
components as shown, and
consult a specialized technician
if necessary.
Control panel (Model shown: UA046)
Mode display
Gear setting for
Slush hardness/Juice
temperature
Mode selection
button
Increase button
Decrease button
Note: When left idle for more than 1 minute, the control panel will be locked automatically.
To unlock, press and hold the light button
UA044_UA045_UA046_ML_A5_v1_20240112.indb 5 UA044_UA045_UA046_ML_A5_v1_20240112.indb 5
Fig.35
Temperature display
for 3 seconds.
EN
SET button
On/off switch
Light button
5
2024/1/12 10:10 2024/1/12 10:10