Polar UA044 Benutzerhandbuch Seite 11

Re-assembly
All the removed parts must be re-located in place.
Some components must be adequately lubricated
to ensure they can work efficiently.
1. Apply the seal (A) on the auger as shown.
Always ensure to check the seal integrity.
Should it be worn, replace with a new one
immediately. Replace the seal (A) at least
once a year.
2. Using the Vaseline provided, lubricate the seal
(A) in the area as shown.
UA044_UA045_UA046_ML_A5_v1_20240112.indb 11 UA044_UA045_UA046_ML_A5_v1_20240112.indb 11
3. Apply the bowl seal, lubricating the entire
surface as indicated by the arrow.
4. Introduce the auger, engaging head (C) with
shaft (D). If necessary, rotate the auger to
engage it.
5. Fixing the bowl back in place: Place the
bowl on the seat then push to the back side,
ensuring all bowls are fixed into the bottom
seat.
EN
CLICK
11
2024/1/12 10:10 2024/1/12 10:10