SSS Siedle BSG 650-02 Programmieranleitung Seite 8

Programmierung
Programmiermodus einschalten
Bild 4
BTLM aktiv schalten
Bild 5a
BTLE aktiv schalten
Bild 5b
BT aktiv schalten
Bilder 6 bis 8
Ruftaster zuordnen
Bild 9 u. 10
Kontrolle/Check
Bilder 11 bis 14
Parallelbetrieb von 2 BT's
1. BT aktiv schalten: Bilder 15 bis 17
2. BT aktiv schalten: Bilder 18 bis 20
Ruftaster zuordnen
Bild 21 u. 22
Programmiermodus ausschalten
Bild 23 u. 24
4
English
Commissioning
Application
The bus control unit BSG 650-... is
the supply and control unit for max.
31 system components in one line. It
comes in a 3-grid housing for switch
panel mounting and is supplied by
the NG 602-... with 24 V DC.
Wiring diagram AS-TYR-1/1
Note non-recurring address
setting in the system!
Operating elements
• Buttons to enter the programming
mode for the connected bus users.
• LED for status display during
programming.
• Rotary switch for setting the
address (1-9 and A-F). "0" is not
admissible as an address.
Terminal assignment
Ta,Tb User bus cores
Sa, Sb System bus cores
Tö, Tö Relay contact door release
24V 2A
Li, Li Relay contact light
24V 2A
VC Video actuation
GND Supply for VC
Components
BTS 750-... Bus telephone standard
BTC 750-... Bus telephone deluxe
BT Stands in the following for standard and deluxe bus telephone
BTLM 650-... Bus door loudspeaker module
BTM 650-... Bus call button module (1-4 call buttons)
BTLE 050-... Bus custom fit door loudspeaker
BRMA 050-... Bus call button matrix
BSG 650-... Bus supply and control unit
Note non-recurring address setting in the system!
BSM 650-... Bus control module
BIM 650-... Bus interface module connects the bus intercom system with
the Vario bus
BSE 650-... Bus switching device
BEM 650-... Bus input module
BNS 750-... Bus-auxiliary signalling unit
NG 602-... Line rectifier for one phase (max. 31 bus users)