Cleaning; Faults And Remedial Measures; Disposal; Technical Data - Euromate 482316 Originalbetriebsanleitung

– Always use the finger hold to support the heater
when pressing the buttons on the control panel.
– Press and hold the plug rotation button on the
back of the plug-in heater.
– For a horizontal heater position, rotate the plug
90° clockwise whilst holding the plug rotation but-
ton.
– For a vertical heater position, rotate the plug 90°
counter clockwise whilst holding the plug rotation
button.
WARNING! Risk of injury! Only attempt to
rotate the plug if the plug-in heater is cool
and unplugged.
Thermal Cut-out Device
The plug-in heater is fitted with a thermal safety cut-
out device, built in to prevent it from overheating.
Should the plug-in heater start to overheat, the ther-
mal safety cut-out system will automatically operate
and the heat settings will switch off. If this happens:
– Switch off the plug-in heater by pressing the on/off
switch.
– Allow the plug-in heater to cool before removing
from the plug socket.
– Check that the plug-in heater is unplugged from
the mains power supply and allow it to cool for
approx. 15 minutes.
Fault/malfunction
Device does not work or does not
heat
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Disposal

Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.

Technical data

Item number
Nominal voltage
Nominal output
Protection class
Dimensions
Weight
Cause
Is the device switched off or set on
ventilation without heat?
No mains voltage?
482316
220–240 V~, 50/
60 Hz
700 W
II
13,5 × 10,5 ×
12,6 cm
0,37 kg
– Clear any blockages present on the vent, being
careful not to damage the plug-in heater.
– Plug in and switch on the plug-in heater at the
mains power supply.

Cleaning

DANGER! Risk of injury! Before all work
on the device, always disconnect the mains
plug.
– Switch off the device and let it cool off completely.
– Pull out the plug.
– Wipe the device with a slightly damp cloth.

Faults and remedial measures

When something isn't working...
DANGER! Risk of injury! Improperly per-
formed repairs can lead to the device not
functioning safely. This endangers yourself
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedial measure
Switch on the device or set the de-
sired heat level.
Check cable, plug, socket and fuse.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
GB
21