Werbung
Verfügbare Sprachen
Verfügbare Sprachen
∙ Always ensure that the action of the motor cannot be
impeded or blocked by over-solid ice-cream or any hard
objects.
∙ To prevent the ice-cream bowl from being damaged, do
not use any sharp or pointed metal objects to remove
the ice-cream.
∙ When removing the plug from the wall socket, never pull
on the power cord; always grip the plug itself.
∙ Do not let the power cord hang free.
∙ Do not allow the appliance or its power cord to touch hot
surfaces or to come into contact with any heat sources.
∙ No responsibility is accepted if damage results from
improper use, or if these instructions are not complied
with.
Applications
The appliance is suitable for making ice-cream, fruit ice-
cream (sorbet), frozen yoghurt, chilled drinks as well as for
making yoghurt.
Before using for the first time
∙ Remove the stickers from the display and the top of the
appliance, and also any other packing materials.
∙ Clean the appliance as described in the section
Cleaning and care.
∙ Avoid tilting the unit more than 45°. After unpacking,
or if the unit has been tilted more than 45° during
transport, allow it to stand upright for at least 4
hours before it is connected to the mains. Do this
also before the appliance is used again.
Operation
On/Off switch
Once it is connected to the mains, switch the appliance on
by using the On/Off switch on the lower right side. Always
switch off after use.
Rotary switch
The rotary switch is used to select and change to different
functions of the appliance:
Turning:
Changing between programmes and setting the processing
time
Pressing briefly:
∙ Selecting the chosen programme
∙ Programme start
∙ Interrupting the programme to change the processing
time
Pressing longer:
Interrupting the programme and returning to previous menu
12
Display
∙ After switching on, the different programme options flash
in the display.
∙ Once a programme is selected, the corresponding
symbol remains permanently lit, the pre-set processing
time starts flashing and can be changed.
∙ During a programme sequence, the display alternates
between the remaining running time and the
temperature inside the processing bowl (but not during
the yoghurt programme).
Programmes
Cooling
To cool down liquids without stirring.
The processing time can be set from 5 to 60 minutes.
The pre-set time is 30 minutes.
Stirring
To stir liquids without cooling.
The processing time can be set from 5 to 60 minutes.
The pre-set time is 10 minutes.
Making ice-cream
For making ice cream.
The processing time can be set from 5 to 60 minutes.
The pre-set time is 60 minutes.
Making yoghurt
For making yoghurt.
The processing time can be set from 3 to 24 hours.
The pre-set time is 8 hours.
Preparing the unit
∙ Prepare all ingredients in a separate container according
to the chosen recipe.
∙ The maximum fill capacity is 0.75 litres. Do not fill the
bowl to more than 60% when making ice-cream, as the
mix will expand during the freezing process.
∙ Ensure that the bowl is clean and dry.
∙ Place the ice-cream bowl into the housing. Caution:
Ensure that the handle mountings fit snugly into the
corresponding recesses on the main unit.
∙ For the 'Stirring' and 'Making ice-cream' programmes, fit
the stirring insert into the ice bowl.
∙ Put the properly mixed ingredients into the bowl.
∙ Fit the lid and turn it anti-clockwise to lock it (
The hinged opening in the lid must be facing forward.
The opening in the lid allows for adding further
ingredients during processing.
∙ Insert the plug into a suitable wall outlet.
∙ Use the On/Off switch to turn the appliance on.
∙ Unless there is any further input, the display turns dark
after approx. 15 seconds.
→
).
Werbung
