Herunterladen Diese Seite drucken

Peach PB200-30A Bedienungsanleitung Seite 7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Safety notices
The following safety notices must be
followed when using electric devices :
AVOID THE DANGER OF DEATH
FROM ELECTRIC SHOCK!
Immediately have a malfunctioning or
damaged device inspected and repaired
by an authorised professional or cus-
tomer service.
Avoid the risk
of injuries!
Never touch the heating surface, as it
becomes very hot.
Description
Document holder
1
Start button
2
On / Off switch
3
OK light
4
Power indicator
5
Binding shaft
6
Cooling rack
7
Operation
Switching on the thermal binding machine
Connect the device to the power supply
and press the On / Off switch
(Position "I"). The red power indicator
will light up: The device will heat up to
the operating temperature. The device
will reach the optimal operating temper-
ature after approx. 3 minutes. The green
OK light
will light up and an acoustic
4
signal wil sound.
Binding
Select the correct Peach thermal portfo-
lio and place the pages to be bound in it
(see chart).
6
Number
of sheets
(80 g / m
Portfolio
thickness
in mm
Take the portfolio and hit it on the spine
once or twice.
Lift the document holder
up.
Place the prepared thermal portfolio into
the binding shaft
spine touches the heating surface
(see Fig. C).
Now press the Start button
light
1 minute the OK light
tinguish and then light steady, acoustic
signal will sound. The binding process is
now complete.
Pull the cooling rack
Now place the bound portfolio into the
cooling rack
cool. After 60 seconds you have a
perfect binding.
Switching off the thermal binding machine
After finishing the respective bindings,
switch off the device by pressing the
On / Off switch
3
Cleaning and care
5
Always remove the power plug before
cleaning. Allow the device to cool down
before cleaning.
Clean the heating surface and plastic
parts with a slightly dampened cloth
and, if necessary, a mild detergent.
15 20 30 40 60 80 100 120 150
)
2
1.5 2
3
4
6
, until the portfolio
6
will start flashing. After approx.
4
4
7
to allow the binding to
7
(Position „0").
3
8
10 12
15
all the way
1
; the OK
2
will briefly ex-
all the way out.

Werbung

loading

Diese Anleitung auch für:

Pb200-70