Chicago Pneumatic CP7205-HRLK Bedienungsanleitung Seite 5

STEP 2 : WET SANDING
Sanding on wet surface with Sander CP7200
Foam interface and sanding papers below to give transparency.
A. Use paper P2000 to carefully sand the full surface
B. Use paper P2500 to continue sanding
C. Use paper P3000 to finish sanding
+
P2000
> During this step, wash the headlight with water and moisten tool
before changing papers
P2500 P3000
> Headlight should be now fully
transparent.