Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Install Net (J) on Rim (I) as shown.
FILLING THE TANK
NEVER leave the structure in a vertical position without adequate load
in the base. It is recommended to use sand.
Place the base in the place where it will be used. Unscrew and remove the
cork.
1 First person: Tilt the base to a 45 ° angle.
2 Second person: Carefully pour sand into the base.
3 Let the sand fall down. Gradually lower the base as you add sand to it
make sure it fills all the space. After filling, screw the cap back on.
Caution:
In winter, water may freeze and damage the base, it is recommended to use sand. When filling the base with water,
always check the water level before use. In the case of an inadequate amount of water, the base may be unstable,
which may result in the structure tipping over.
Regulacja wysokości:
Ściśnij uchwyt HH i przesuwając konstrukcję w górę i w dół dostosuj
kosz do wymaganej wysokości.
17
USER MANUAL
EN
Werbung
