Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
USER MANUAL
Step 6
Fix the pipe W X using screws E1, E2 and E3.,
Attach the height adjustment mechanism HH and GG using the screw sets A1, A2, A3 and A4 and H1, H2 and H3.
Screw it together tightly as shown in the picture below.
Step 7
Put the set of screws D1 , D2 and D3 on the two
shorter rods S and proceed to the assembly of
large springs
Hook the large springs R into the holes in the CC bars and fasten
with screw D
Attention:
Make sure that the backboard is at its highest point before
installing the spring S. Putting the P net on the AA hoop
according to the diagram below.
16
Werbung
