AEG HK634060XB Benutzerinformation Seite 15

2. SAFETY INSTRUCTIONS
2.1 Installation and Electrical
Connection
WARNING!
Only a qualified person must
install and connect this
appliance.
WARNING!
Risk of injury, electric shock, fire
or damage to the appliance.
Follow the installation instructions supplied
with the appliance. Install the appliance in a
safe and suitable place that meets
installation requirements.
Do not use the appliance before installing it
in the built-in structure.
Keep the minimum distance from other
appliances and units.
Do not install or use a damaged appliance.
Remove all the packaging.
Always take care when moving the appliance
as it is heavy. Always use safety gloves and
enclosed footwear.
Protect the bottom of the appliance from
steam and moisture. Seal the cut surfaces
with a sealant to prevent moisture from
causing swelling.
Do not install the appliance next to a door or
under a window. This prevents hot cookware
from falling from the appliance when the door
or the window is opened.
If the appliance is installed above drawers
make sure that the space, between the
bottom of the appliance and the upper
drawer is sufficient for air circulation.
The bottom of the appliance can get hot.
Install a separation panel made from
plywood, kitchen carcass material or other
non-flammable materials under the appliance
to prevent access to the bottom.
The separation panel must cover all space
under the hob.
Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
Make sure that the parameters on the rating
plate are compatible with the electrical
ratings of the mains power supply.
Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can make
the terminal become too hot.
The appliance must be earthed. Make sure
that a shock protection is installed.
Use the correct electricity mains cable. Use
the strain relief clamp on the cable.
Do not use multi-plug adapters and extension
cables.
Make sure not to cause damage to the mains
plug or cable. Do not let the electricity mains
cable tangle.
Make sure the mains cable or plug (if
applicable) does not touch the hot appliance
or hot cookware, when you connect the
appliance to a socket nearby.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
Do not pull the mains cable to disconnect the
appliance, always pull the mains plug. If the
mains socket is loose, do not connect the
mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
The electrical installation must have an
isolation device which lets you disconnect the
appliance from the mains at all poles. The
isolation device must have a contact opening
width of minimum 3 mm.
ENGLISH 15