REVERSING THE OPENING DIRECTION OF THE DOOR
You can reverse the opening direction of the door of your refrigerator. To reverse the
opening direction of the door, follow the instructions below:
Note: keep all the parts, which have been removed, because you will need them to refit
the door.
Tools required:
1
2
3
4
5
6
Procedure:
1
•
Remove the door shelves.
4
•
Using a spatula or a thin blade screwdriver, remove the screw cover located at the
top left of the refrigerator as well as the hinge cover on the right.
screw cover
V.1.0
1.
8 mm socket spanner
2.
Thin blade screwdriver
3.
Spatula
4.
Phillips screwdriver
5.
8 mm adjustable spanner
6.
8 mm spanner
1
2
3
3
2
4
6
5
5
6
hinge
cover
6
•
Remove the upper right hinge by loosening the screws with an 8mm spanner. Be
sure to keep hold of the door.
right hinge
•
Remove the right hinge pin, then put everything in a safe place.
•
Take the door off the lower hinge, taking care not to lose the washer(s) between
the lower hinge and the door.
•
Place the door on a soft, level and stable surface with the outside facing up, and
loosen the screw at the bottom right of the door.
•
Tighten the screw to the left of the door.
screw
7
V.1.0