JK Ergoline Ambition Montageanweisung Seite 23

Please read and observe ...
Installation site
The tanning device must be installed on a flat, even surface.
When setting up Profi tanning devices up to 450 kg, you must ensure that
floors and ceilings in areas used for industrial purposes are designed for
2
a loading of 1500 N/m .
The load bearing capability of ceilings with wooden joists must be dem-
onstrated in detail.
22
Tools and outfitting
The following tools are required for the dismantling / assembly work:
– Cross-headed screwdriver 2
– Screwdriver 2
– Double ended SW 10, 13 and 19 mm spanner
– 4 mm Allen-key