Parameters For Cpu Und Con Units - Ihse Draco vario DisplayPort Handbuch

5.5.3

Parameters for CPU und CON Units

You have to write the following parameters into the configuration file of
both CON Unit and CPU Unit.
Local switching
Parameter
BLANKSCR
PRIVATEMODE
USB 2.0 embedded
Parameter
ENAUSB11
DISUSBAUD
ENAMICAMP
Transmission
Parameter
ENASYNC
Pos: 62 /806-IHSE/Betrieb/UEB_Betrieb @ 5\mod_1278577614980_6.doc @ 41970 @ 1 @ 1
2017-06-06
Function
Activate dark switching between local and
remote console by keyboard or mouse event
(only with HDMI extenders and local control by
an USB-HID CON upgrade module)
Activate switching of video and control between
local and remote console by keyboard
commands (only with HDMI extenders and local
control by an USB-HID CON upgrade module)
Function
Activate USB 1.1 mode for USB 2.0 embedded
upgrade modules (only with USB 2.0 embedded
upgrade module)
Disable USB audio codec
Activate microphone amplifier
Function
Activate a synchronisation impulse to adjust the
pixel clock between the CPU and CON Unit
(49x series only)
Configuration
53