Cameo CLMFXBAR Bedienungsanleitung Seite 27

IR REMOTE CONTROL / IR FERNBEDIENUNG / TÉLÉCOMMANDE INFRAROUGE / MANDO A
DISTANCIA POR INFRARROJOS / PILOT NA PODCZERWIEŃ / TELECOMANDO A INFRAROSSI
EN
Point the infrared remote control either directly at the infrared sensor installed on the front or back
of the lighting system. The maximum range is about 8 metres. In the DMX and slave modes, the
functions on the remote control are disabled (battery for IR remote control: CR2025).
Blackout
Auto Program
Music Control
Pause
Colour selection Colour selection for the LED spotlights and Derby effects. Reset to Auto or
Program
Program
Program
Numeric
buttons
The ON/OFF button is used to switch off all spotlights and laser effects,
regardless of the mode selected on the remote control. Pressing the ON/
OFF button once more activates the previously selected mode again.
Auto programs Pr01 - Pr10 (mix programs LED spotlights/strobe/Derby/
laser). Program selection by pressing repeatedly.
Music controlled programs Pr01 - Pr10. Program selection by pressing
repeatedly. Adjusting the microphone sensitivity on the device (MIC
SENSITIVITY).
Interrupts the program sequence ("freezing" the last scene). Press one
more time to continue the program.
Sound program by pressing AUTO or MUSIC.
Auto programs Pr21 - Pr30 (mix programs LED spotlights/Derby). Program
selection by pressing repeatedly.
Auto programs Pr31 - Pr40 (strobe programs). Program selection by
pressing repeatedly.
Auto programs Pr41 - Pr46 (laser programs). Program selection by
pressing repeatedly.
To adjust the speed for the auto programs. 0 = slowest, 9 = fastest speed.
Switching between Auto and Music controlled programs.
No function
27