Ronda 4003.B Technische Anleitung Seite 8

A
B
C
10/2013 M RONDA AG, Lausen, Switzerland, Phone ++41 (0)61 926 50 00, www.ronda.ch, info@ronda.ch
Technical Instructions 4003.B
2000.577.G Main plate
1.
3305.314.CO Cannon pinion with driver (Aig.0)
2.
2030.017.CO Centre bridge
3. Parts 2030.017.CO, 3004.223 and 3500.059 must be exchanged
together. Centre bridge held by 1 screw 4000.250.
4000.250 Screw
4.
3001.055.FI Sliding pinion
5.
3000.177.CO Setting stem
6.
3017.049 Setting lever
7.
3905.049 Setting lever jumper (3 positions)
8. Setting lever jumper held by 1 screw 4000.250.
4000.250 Screw
9.
3015.081 Yoke (3 positions)
Parts 3015.081 and 3905.067 must be exchanged together.
10.
3905.067 Yoke spring
11. Tensioning the spring arm. Parts 3015.081 and 3905.067 must be
exchanged together.
3622.039 Stator (counter 6h, 9h, chrono)
12.
3603.079 Plastic bracket
13. Platic bracket held by 4 screws 4000.250.
4000.250 Screw
14.
3715.094.RK Rotor
15.
3147.047.CO Intermediate wheel (chrono)
16.
3136.172.CO Second wheel (Aig.0)
17.
1