AVer MD330U Serie Bedienungsanleitung Seite 44

Troubleshooting
What does medical grade mean?
It means the MD330U Series camera is certified under IEC 60601-1-2.
This certification guarantees that the MD330 Series camera effectively limits the generation,
propagation, and reception of electromagnetic energy. By doing so, it minimizes the risks of
undesirable effects like electromagnetic interference (EMI) or physical damage to other operational
equipment.
Can I install the camera upside down?
Yes, make sure to shorten the length of the lens cable by coiling and tying it with a cable tie.
Configure Mirror and Flip functions as needed.
How long is the lens cable?
The lens cable is 180cm.
Can I use an extension USB cable to lengthen the lens cable?
No, doing so may damage the camera. Please contact AVer for optional accessories.
Can I disinfect the camera by spraying alcohol on it?
No, refer to <How to Clean and
How to open the on-screen display (OSD) menu?
1. Make sure the HDMI cable is connected to your camera and display.
2. On the remote control, press and hold Menu
3. A solid purple light on the LED indicator will indicate that the OSD menu is turned on.
The camera suddenly fails to receive my voice and the LED indicator is flashing orange.
 A flashing orange light on the LED indicator indicates that the microphone is muted.
 Upgrade to firmware 1.1 .1030.0 or later to avoid video conferencing software, such as Microsoft
Teams or Google Meet, from muting the camera when it deems the received volume too high.
Firmware upgrade and rollback.
 To upgrade:
Firmware 1.1.1017.0 or later can upgrade to the latest version.
Firmware 1.1.1016.0 or before must first upgrade to firmware 1.1.1017.0 before upgrading to the
latest version.
 To roll back:
The earliest version you can roll back to is firmware 1.1.1017.0.
Disinfect>.
34
for 3 seconds to open the OSD menu.