AVer MD330U Serie Bedienungsanleitung Seite 20

5. microSD Card: Insert a microSD card to store captured images or recordings (Note 1 and 2).
 Compatible microSD Cards
Brand
Speed Class
Capacity
Format
6. RS-232: Connect the camera to a Joystick or laptop to control the camera. You can optionally
purchase the RS-232 Adapter. The PIN definition is shown as below (Note 1).
7. Power: The camera and the connected TV or monitor must have grounding design. Use the
supplied power adapter and power cord to connect the camera to a power outlet and make
sure the power cord of the TV or monitor supports the grounding plug.
Note:
1. Accessory equipment connected to the analog and digital interfaces must be in compliance
with the respective nationally harmonized IEC standards (i.e. IEC 60950 for data processing
equipment, IEC 60065 for video equipment, IEC 61010-1 for laboratory equipment, and IEC
60601-1 for medical equipment.) Furthermore all configurations shall comply with the
requirements of the system in standard IEC 60601-1. Everybody who connects additional
equipment to the signal input part or signal output part configures a medical system, and is
therefore, responsible that the system complies with the requirements of the system in
standard IEC 60601-1. The unit is for exclusive interconnection with IEC 60601-1 certified
equipment in the patient environment and IEC 60XXX certified equipment outside of the patient
environment. If in doubt, consult the technical services department or your local representative.
2. Please insert a microSD card to the card slot before using the Snapshot or Recording functions.
To access the microSD card, please refer to Mass Storage in the <System> chapter for more
details. For the recommended microSD cards, please refer to the <Compatible microSD
Cards> chapter.
Kingston, SanDisk, Samsung, Lexar
C10, U1, U3, V10, V30
16G, 32G
FAT32, exFAT
10