Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mode Switch
The lens must be detached or installed in Handheld Mode. Use the mode button to switch between
modes and the LED indicators to confirm your current mode.
Detach Camera Head
Camera Head
Camera Head Holder
To detach the lens:
1. Press the mode button to switch from Standard Mode to Handheld Mode. The lens will
automatically turn up.
2. Press the latch button.
3. Remove the lens from the lens holder.
To install the lens:
1. Make sure the camera is in Handheld Mode. If not, press the mode button to switch from
Standard Mode to Handheld Mode.
2. Insert the lens in the lens holder until you hear a click.
To take snapshots in Handheld Mode:
1. Make sure a microSD card has been inserted in the slot.
2. Select a focus distance on the web interface (see
3. Long press (1 second) the snapshot button to take snapshots. Short press the snapshot button
to adjust the focus.
To turn on the fill light in Handheld Mode (MD330U):
1. Press the fill light button on the lens to turn it on, and press the button repeatedly to cycle
through 3 brightness levels (On > Low > Medium > High > Off).
2. With the fill light on, the closest shooting distance should be 4.5 cm.
Install Camera Head
MODE
Camera Control
5
MODE
> Focus Near Limit).
Werbung
