Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Web Interface
Connect the camera from a remote site through the internet.
Access the Web Interface
To access the Web interface of the camera, you have to find the IP address of the camera using
AVer IPCam Utility or AVer PTZ Management software.
AVer IPCam Utility
To find the IP address of your cameras using the IPCam Utility installer, follow the steps below.
1. Download the IPCam Utility from
Utility.
2. Click Search, and all available devices will be listed on the screen.
3. Select a camera from the list, the camera info will be displayed in the Settings field.
[Note] The default network of the camera is Static IP (192.168.1.168) and default ID/Password
are admin/admin. If you want to configure the network to DHCP, input the ID/Password in the
Login field, select the "camera model" on the list, select "DHCP" and then click the Apply button.
4. To access the Web interface, double-click on the IP address in the IPv4 Address column.
For the first-time user, you will be prompted with a Login window to change the ID and password.
5. Login with the new ID/Password, the Web interface of the camera will be displayed (Chrome
browser).
[Note] If IPCam utility cannot find the camera, please check following:
1. Please make sure the Ethernet connection of camera is well connected.
2. The camera and PC (IPCam Utility) are in the same LAN segment.
https://www.aver.com/download-center
16
and run the IPCam
Werbung
