Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Set Up Your Camera
You can configure camera settings using the OSD menu or the web interface of the camera.
OSD Menu
To access the OSD menu, connect the camera to a monitor or TV using an HDMI cable, and then
use the supplied remote control to operate the OSD menu.
Press and hold the menu button
buttons ▲▼ to select and press Enter
IP Address Setup
Static IP
1. Press the menu button
2. Go to Network > Static IP.
[Note] Turn the DHCP off before setting up static IP (Network > DHCP > OFF).
3. Select the IP Address, Gateway, Netmask, and DNS to configure. Press Enter
the number buttons to enter the value.
for 3 seconds to bring up the OSD menu. Use directional
to confirm settings.
on the remote control to bring up the OSD menu.
11
and use
Werbung
