JK-Products Ergoline INSPIRATION Serie Montageanweisung Seite 63

Information for service staff
11/2013
3.6 Disconnect the device from the power
supply and ensure that it cannot be
switched on again
DANGER!
Electricity throughout entire device!
If work is to be performed on the devices, disconnect them from
the power supply. This means that all live cabling must be
switched off.
Switching off the device alone is insufficient, as certain points
may still be live. Therefore, switch off all fuses before perform-
ing any work and – if possible – remove them.
DANGER!
Personal danger due to electric shock!
Severe accidents can occur if unintentionally switched on
again.
Immediately after disconnecting from the power supply, ensure
all switches or fuses used to disconnect the power supply can
not be switched on again.
– Lock the fuse box with a padlock.
In case of circuit breakers which cannot be unscrewed, a strip of adhesive
tape may be applied over the actuation lever with the wording 'Do not switch,
danger!' (1 + 2).
A prohibition sign with the text: 'Work in progress!'
 'Place: ..............................'
 'Sign may only be removed by: ............'
must always be securely mounted immediately.
DANGER!
Personal danger due to electric shock!
Prohibition signs must not be fixed to or come into contact with
live parts.
Installation instructions 11/50