Before Use; Intended Use - aidapt VM926 Gebrauchs- Und Montageanleitung

INTRODUCTION
Thank you for deciding to purchase the Pill Puncher from Aidapt. The Pill Puncher is
manufactured from the finest materials available. When used correctly it is
designed to give many years of reliable, trouble-free service.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

This Pill Puncher is a useful aid for those with limited dexterity or weakness in the
hands and arms. It assists the user in releasing tablets from a blister pack or foil-
backed sheet of pills. It can be used on a flat surface with one hand, or simply held
in and operated by one hand, whichever is most comfortable for the user.
INSTRUCTIONS FOR USE
The Pill Puncher is simple to use, we recommend that you place it on a flat surface
for ease of use:
Place the Pill Puncher onto a flat surface, with the hinged lid uppermost.
•
Open the lid of the Pill Puncher fully.
•
Position the tablet blister pack onto the top of the hollow compartment,
•
with one table on the recessed area.
Bring the lid of the Pill Puncher down firmly, with the raised punch section
•
directly above the tablet.
The tablet will be punched free from the blister into the storage
•
compartment below.
Usage and Maintenance Instructions
All manuals and user guides at all-guides.com
2
Ver. 2 07/2012 (2151)