EN
1
42
GETTING STARTED
Before using the device, the following requirements are needed:
•
A broadband connection in combination with a wired/wireless access
point, router or similar network device.
•
The network device needs to support WIFI (802.11b/g/n) wireless
connection.
•
A PC or smart phone with a network ready. This network has to be the
same one as the device eqtuipped with.
Get the network ready
For wireless LAN (WLAN) network connection: Chek if WLAN LINK/ACT light
of the wired/wireless access point or router is illuminated. Consult the user
guide of that for any questions.
Note: WiFi allows date transfer over short distances within 20 meters
without the need of cabling between the devices. Any walls or ceilings may
reduce the strength of the WiFi connectivity.
•
Therefore try to locate the Roadie Smart and/or the access point within
the distance above, and avoid any obstacles between two devices.
•
Connect the power adaptor to the back of the appliance and plug into
DC IN socket.
•
When it is first time running the device, the system will ask you to set
Language and Network Configurations.
2
3