Trend Chart Display - Rovary Rv2000P Bedienungsanleitung

Trend chart display

The trend chart graph shows the past measurements
for one of the three parameters (CO2/RH/TEMP).
There are 4 modes that can be switched using the
arrows: CO2, TEMP, RH and CYCLE (CYCLE
automatically switches between CO2/TEMP/RH).
How does the trend chart view work?
1. Press switch between the three parameters or CYCLE (CO2/TEMP/RH).
2. Press switch between the different zoom levels (minute/hour/day/week).
Table of available zoom levels
Below is a table of the available zoom levels
for all parameters CO2/TEMP/RH and the
duration of each division for the relevant
zoom levels.
Max/Min
In the top right corner of the display are two numeric indicators: MAX and MIN.
When the zoom level is changed, the MAX and MIN values are displayed on the graph
of the selected parameter (CO2, RH and TEMP).
6
Zoomlevel
1M (minute)
1H (hour)
1D (day)
1W (week)
Time per division
5sec/div
5m/div
2h/div
0.5d/div