Turn On/Off Human And Plant Modes - Rovary Rv2000P Bedienungsanleitung

Turn on/off human and plant modes

The human mode is actually the 'normal' mode and can be used when the PPM value
in a room needs to be measured. This functionality is the default setting in the monitor so,
in principle, nothing needs to be adjusted as soon as the monitor has been received.
The plant mode can be used when there is a need to grow plants or vegetables. Plants
need a certain CO2 value to grow healthily.
This feature is not set automatically, however it can be set up by following the steps below:
1. Click .
2. Click once on
3. Click .
4. Click to change mode.
5. As soon as the brackets around the tree
the meter is in plant mode. You can choose no. 2 to 9. Go to Annex 1 to see which plant mode
you can use per plant species. This can be adjusted with the up and down arrows.
6. As soon as the brackets around the
To return from plant mode to human mode, the number 0 must be selected using the arrows.
8
to go to . .
icon are displayed, the monitor is in human mode.
are displayed in the screen on the CO2 monitor,