Getting Started: Using The Co2 Monitor For The First Time - Rovary Rv2000P Bedienungsanleitung

Getting started: Using the CO2 monitor for the first time

Connect the charger
To switch on the CO2 monitor, the device must be connected to the
charger when using for the first time.
Press pin
Press the pin on the back of the CO2 meter, the monitor will now turn on.
Attention: The pin must be pushed in all the way or the monitor will not work.
Ready to use
The display will count down from 30 to 0. Once the countdown is complete,
the product is ready to use. The CO2 monitor is already calibrated.
3