Adjust Celsius Or Fahrenheit; Adjust Limits (Adv) - Rovary Rv2000P Bedienungsanleitung

Adjust Celsius or Fahrenheit

The meter can be set to Celsius and Fahrenheit. The following steps can be performed to
switch from Celsius to Fahrenheit:
1. Click .
2. Click 4 times on
3. Click when
4. Click /
5. Click when the preferred unit (°C/°F) is shown.

Adjust limits (ADV)

The limits are set as standard to low (LO) 800 PPM and high (HI) 1200 PPM,
this can be adjusted according to preference by using the following steps:
1. Click .
2. Click 5 times on
3. Click .
4. In order to change the low (LO) setting, press
After this, the PPM value can be increased according to preference using
Then click again to set the new limit.
5. To change the high (HI) position, press
be increased according to preference using the arrows. Click
Click to exit this setting and return to the main screen.
10
to go to .
icon is underlined.
to switch from C to F.
to go to .
when 'LO' is displayed on the screen.
and then . After this, the PPM value can
again to set the new limit.
/ .