SOMFY TL 25 WT Setting tool Anleitung Seite 36

EN
2.4. TIPS AND ADVICE ON INSTALLATION
2.4.1. Questions about the product?
Observations
The motorised The TL 25 WT Setting tool
product does wiring is either disconnected
not operate. or not connected.
The drive is damaged.
The TL 25 WT The TL 25 WT Setting tool is
Setting tool disconnected.
does not work.
͉
If the motorised product or the 25 WT Setting tool still does not work, contact a
drive and home automation professional.
2.4.2. Factory mode
Press the RESET button for approximately
seven seconds until there are two up and down
movements of the motorised product (the
RESET push-button indicator light lights up
for the duration of the operation), the drive is
reinitialised to its original configuration (the RESET button indicator light
LED goes out).
34
Copyright
Possible causes
©
2020SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
TL 25 WT Setting tool
Solutions
Switch off the mains
power supply, check the
connections and switch back
on the mains power supply.
Contact a drive and home
automation professional.
Connect the TL 25 WT
Setting tool to a mains
adaptor and plug it into the
wall socket.
7 s