SOMFY TL 25 WT Setting tool Anleitung Seite 35

TL 25 WT Setting tool
2.3. COMMISSIONING
Restore the power supply,
2.3.1. Setting the end limits
͉
The end of travel limits can be set in any order.
2.3.1.1. Setting the lower end limit
1) Press the Prog. button for two secondsLower
m
end limit . The Prog. LED indicator light
Lower end limit
Setting tool control unit
2) Press the Down
the desired position is reached.
͉
Adjust the position, if necessary, using the Up
k
and Down buttons.
3) Press the OK button until there is an up and
down movement of the motorized product,
the OK push-button indicator light lights up
and then goes out, the lower position is set.
2.3.1.2. Setting the upper end limit
1) Press the Prog. button for two secondsUpper
d
end of The Prog. LED indicator light
Upper end limit
Setting tool control unit
i
2) Press the Up button and release it when the
desired upper position is reached.
͉
Adjust the position, if necessary, using the Up
k
and Down buttons.
3) Press the OK button until there is an up and
down movement of the drive, the OK push-
button indicator light lights up on and then
goes out, the upper position is set.
©
Copyright 2020 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
f
lights up, the TL 25 WT
b
is active.
k
button and release it when
e
lights up, the TL 25 WT
b
is active.
ON
RESET
Prog Prog
UP Down
Up
OK
Down
1)
2 s
2) 3)
i
1)
2 s
2) 3)
i
EN
33