SOMFY TL 25 WT Setting tool Anleitung Seite 32

TL 25 WT Setting tool
EN
1. PRIOR INFORMATION
1.1. FIELD OF APPLICATION
The TL 25 WT Setting tool is a tool specially designed for adjusting internal
Venetian blinds fitted solely with a TLW 25 WT Somfy wired type drive. If in
doubt, consult a Somfy representative.
The professional drive and home automation installer must ensure that this
product, once installed, complies with the standards in force in the country
of use.
1.2. LIABILITY
Before installing and using the TL 25 WT Setting tool, read these instructions
carefully.
This product must be installed by a drive and home automation professional,
in accordance with Somfy's instructions and the regulations applicable in
the country in which it is commissioned.
Use of this product is reserved exclusively for a qualified person.
Any use of this product outside of the sphere of application described in this
guide is prohibited. Such use, and any failure to comply with the instructions
given in this guide, absolves Somfy of any liability and invalidates the warranty.
The installer must inform his customers of the usage and maintenance
conditions for this product and must provide the usage and maintenance
instructions after installing this product. Any After-Sales Service operation
on the product must be performed by a drive and home automation
professional.
Should any doubt arise during installation of the product or for additional
information, consult a Somfy representative or visit www.somfy.com.
30
©
Copyright 2020SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.