Description Of Symbols; Specification; General Safety - Triton TWX7 Gebrauchs- Und Sicherheitsanweisung

Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This product has unique features and, even if you are familiar with similar
products, it is necessary to read this manual carefully to ensure you fully understand the instructions. Ensure all users of the tool read and fully understand this manual.

Description of Symbols

Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Class I construction (protective earth)
Conforms to relevant legislation and safety standards.
Risk of electrocution!
Be aware of kickback!
WARNING
LIFTING HAZARD
Single Person Lift could cause injury
Use assistance when moving or lifting
WARNING: This product is heavy and as a precaution it is advised that two people assemble the machine.
Caution!
Toxic fumes or gases!
DO NOT touch! DO NOT access the guard without removing the power. Keep children and bystanders
away while operating a power tool. Distractions can cause you to lose control. All visitors should be kept
safe distance from work area.
Indoors use only!
DO NOT use in rain or damp environments!
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice.
WARNING: Moving parts can cause crush and cut injuries.
MAX
150 Maximum load
kg
Technical Abbreviations Key
V
~, AC
A, mA
n
0
Ø
°
λ
GB
Hz
, DC
W, kW
/min or min
-1
A
h
dB(A)
m/s
2
3
Volts
Alternating current
Ampere, milli-Amp
No load speed
Diameter
Degrees
Wavelength
Hertz
Direct current
Watt, kilowatt
Operations per minute
Amp hours (battery capacity)
Decibel sound level (A weighted)
Metres per second squared (vibration magnitude)
Original Instructions

Specification

Chassis specification
Model number:
Dimensions (standing) (LxWxD):
Dimensions (folded) (LxWxD):
Module insert dimensions (LxWxD):
Max load capacity:
Net weight (chassis only):
Electrical switchbox specification
Rating :
Max power rating:
No voltage release (NVR) switch with knee
operation:
Ingress protection:
Length of power cord:
Protection Class:
Clamping Table Module specification
Model number:
Bench dog holes:
Bench dog hole diameter:
Net weight of module:

General Safety

WARNING: When using electric power tools, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and personal injury including the following safety information. Read all these instructions before
attempting to operate this product and save these instructions for future use.
WARNING: This appliance is not intended for use by persons (including children) with reduced, physical or mental
capabilities or lack of experience or knowledge unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety. Children must be supervised to ensure that they do not play
with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account
the working conditions and the work to be performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1 - Keep work area clear - Cluttered areas and benches invite injuries
2 - Consider work area environment
- Do not expose tools to rain
- Do not use tools in damp or wet locations
- Keep work area well lit
- Do not use tools in the presence of flammable liquids or gases
3 - Guard against electric shock - Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators,
ranges, refrigerators)
4 - Keep other persons away - Do not let persons, especially children, not involved in the work touch the tool or the
extension cord and keep them away from the work area
5 - Store idle tools - When not in use, tools should be stored in a dry locked-up place, out of reach of children
6 - Do not force the tool - It will perform the job better and safer at the rate for which it was intended
7 - Use the right tool - Do not force small tools to do the job of a heavy duty tool
- Do not use tools for purposes not intended; for example do not use circular saws to cut tree limbs or logs
8 - Dress appropriately
- Do not wear loose clothing or jewellery, which can be caught in moving parts
- Suitable safety footwear is recommended when working outdoors.
- Wear protective covering to contain long hair
9 - Use protective equipment
-Use safety glasses
-Use face or dust mask if working operations create dust
WARNING: Not using protective equipment or appropriate clothing can cause personal injury or increase the severity
of an injury.
10 - Connect dust extraction equipment - If the tool is provided for the connection of dust extraction and collecting
equipment, ensure these are connected and properly used
11 - Do not abuse the power cable - Never yank the power cable to disconnect it from the socket. Keep the power
cable away from heat, oil and sharp edges. Damaged or entangled power cables increase the risk of electric shock
12 - Secure work - Where possible use clamps or a vice to hold the work. It is safer than using your hand
13 - Do not overreach - Keep proper footing and balance at all times
TWX7
1036 x 737 x 900 mm (40¾" x 29" x 35½")
995 x 737 x 317 mm (39¼" x 29" x 12½")
660 x 410 x 50mm (26" x 16 ⁄ " x 2")
1
4
150 kg (330 lbs)
23.2 kg (51 lbs)
220-240V~ 50/60Hz
13A (3100W) UK, 16A (3500W) EU
Mounted at the front of the chassis
IP52
1.2m (4ft approx)
Class I
TWX7CT001
40
Ø 20 mm (for ¾" dogs)
3.8 kg (8.4lbs)